Masterflow by Hogan

Many construction and building companies are choosing Masterflow Flowing Screed over traditional sand and cement. This new floor screed system is designed to provide a smooth level surface in both commercial and domestic buildings prior to floor finishes. For more information on Hogan’s Masterflow Flowing Screed send us an email or contact our offices in Bangor, North Wales.

Download the Masterflow brochure

The Key Features of Masterflow Flowing Screed

– Increased productivity
– 2000 m²/day can be easily achieved (average 500-1000m²/day)
– Finished within 24-48 hours
– No curing required
– Extremely low shrinkage (does not curl and minimises the risk of cracking)
– Suitable for floating floor construction
– No need for reinforcement
– Ideal for use with underfloor heating systems enabling rapid commissioning of the underfloor heating in accordance with BS1264:2001 (Part 4 clause 4.4)

– Significantly reduces thickness

– Thinner section
– Large bay sizes of up to 30-40 linear metres depending on application
– Dries at a rate of 1mm per day up to a screed depth of 40mm (however this can be affected by adverse site conditions)
– Forced dried 7 days after application
– Easily achieves SR2 finish as described in BS8204
– Protein free – cannot harbour harmful bacteria

– Non combustible (tested to BS476 Part 4)<
– Minimal thermal expansion (0.012mm/mK)

Why Choose Masterflow?

The Masterflow Flowing Screed boasts many benefits over traditional sand and cement screed. It’s quicker to lay, has a thinner screed depth and is less labour intensive. There’s also a much lower risk of shrinkage or cracking. The most notable benefit is seen when it’s used with underfloor heating systems. Flowing anhydrite screeds fully encapsulate the heating pipes without voids and need only to cover the pipes by 25mm, resulting in a much more responsive heating system which in turn is more economical to run.

Quality Assured Concrete

Hogan Concrete is both BS EN ISO 9001 accredited and certified with QSRMC. There are many benefits to being QSRMC certified such as mixes having the agreed water/cement ratio and minimum cement content, all mixes having the control of alkalis, chlorides and TSA (Thaumasite Sulfate Attack) where appropriate and more. Contact our friendly team to learn more about QSRMC certification.